Forums Music Speaker Plans Speakers

Viewing 25 posts - 1 through 25 (of 121 total)
  • Author
    Posts
  • #1043412
    Anonymous

      Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!

      #1152343
      Raj
      Participant
        #1207949
        Raj
        Participant
          #1152356
          d.r.e.a.m
          Participant
            MrAHC wrote:
            Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!

            i just recently replaced the 15 inch cone in my jbl with an eminence.as far as i no im pretty sure they only do 1 power rating for the 15 inch (not 100% on this tho) the best place to buy eminence drivers that ive found is maplins..hope ive been some help.did you buy all of dans gear?couldnt have made it up there to pick up that tweaker box tho pretty gutted….talk soon..:bounce_fl :bounce_g: :bounce_fl :bounce_g: :bounce_fl :bounce_g:

            #1207983
            d.r.e.a.m
            Participant
              MrAHC wrote:
              Need to replace a pair of emminence 15 inch speakers though i have no idea what emminence speakers i need to replace them with as theres no info on the back of em??? Help!

              i just recently replaced the 15 inch cone in my jbl with an eminence.as far as i no im pretty sure they only do 1 power rating for the 15 inch (not 100% on this tho) the best place to buy eminence drivers that ive found is maplins..hope ive been some help.did you buy all of dans gear?couldnt have made it up there to pick up that tweaker box tho pretty gutted….talk soon..:bounce_fl :bounce_g: :bounce_fl :bounce_g: :bounce_fl :bounce_g:

              #1152357
              d.r.e.a.m
              Participant

                nice 1 raj thats some help for me to as i need to get new drivers for the tops on my peaveys…:wink:

                #1207985
                d.r.e.a.m
                Participant

                  nice 1 raj thats some help for me to as i need to get new drivers for the tops on my peaveys…:wink:

                  #1152344
                  Raj
                  Participant

                    🙂 excellent – glad to help 🙂

                    #1207952
                    Raj
                    Participant

                      🙂 excellent – glad to help 🙂

                      #1152355
                      Ruff Beat Provider
                      Participant

                        If your replacing them do you not have the old driver to check?
                        What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                        #1207981
                        Ruff Beat Provider
                        Participant

                          If your replacing them do you not have the old driver to check?
                          What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                          #1152304
                          Anonymous
                            Ruff Beat Provider wrote:
                            If your replacing them do you not have the old driver to check?
                            What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                            fuck knows there from them mids i bought off danooops on here. theres nowt on the back not even what wat they are or what Ohms and i’m shit at stuff like that.

                            #1207846
                            Anonymous
                              Ruff Beat Provider wrote:
                              If your replacing them do you not have the old driver to check?
                              What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                              fuck knows there from them mids i bought off danooops on here. theres nowt on the back not even what wat they are or what Ohms and i’m shit at stuff like that.

                              #1152345
                              Raj
                              Participant

                                You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

                                Dan may be able to recall what amp was powering them which would also help you out 😉

                                #1207954
                                Raj
                                Participant

                                  You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

                                  Dan may be able to recall what amp was powering them which would also help you out 😉

                                  #1152305
                                  Anonymous
                                    Raj wrote:
                                    You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

                                    Dan may be able to recall what amp was powering them which would also help you out 😉

                                    probbly easeyr just to get rid of the cabs n buy new. it will put me behind scedule for spring partys otherwise.

                                    #1207849
                                    Anonymous
                                      Raj wrote:
                                      You should be able to narrow it down using the spec sheets – they tell you what they weigh and all the details of how they look. They will at least allow you to narrow it down anyway. Every speaker driver weighs something different.

                                      Dan may be able to recall what amp was powering them which would also help you out 😉

                                      probbly easeyr just to get rid of the cabs n buy new. it will put me behind scedule for spring partys otherwise.

                                      #1152306
                                      Anonymous

                                        looks like the delta-pro is the man for the job but it runs at 8 ohm. sure the others were at 4ohm??? fuckin confuses me so it does………

                                        #1207852
                                        Anonymous

                                          looks like the delta-pro is the man for the job but it runs at 8 ohm. sure the others were at 4ohm??? fuckin confuses me so it does………

                                          #1152346
                                          Raj
                                          Participant

                                            The resistance will vary depending on how you link up your speakers – you can take 2 x 8 ohm speakers and connect them in parallel and get speaker resistance = 4 ohms

                                            http://en.wikipedia.org/wiki/Series_and_parallel_circuits

                                            might help you out:wink:

                                            #1207957
                                            Raj
                                            Participant

                                              The resistance will vary depending on how you link up your speakers – you can take 2 x 8 ohm speakers and connect them in parallel and get speaker resistance = 4 ohms

                                              http://en.wikipedia.org/wiki/Series_and_parallel_circuits

                                              might help you out:wink:

                                              #1152358
                                              d.r.e.a.m
                                              Participant
                                                Ruff Beat Provider wrote:
                                                If your replacing them do you not have the old driver to check?
                                                What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                                                no i dont tw@ mate of mine left em in da cupboard when he moved out of his house real sharp along with 4 of my 15 inch drivers an the wood (cut up an ready to assemble!!) so a bit pissed off about that 1!!they are mid/top flared horns so will have to check dimensions befor buying….why did you ask??….lol…thought you was talkin to me???loosin it i swear!!

                                                #1207989
                                                d.r.e.a.m
                                                Participant
                                                  Ruff Beat Provider wrote:
                                                  If your replacing them do you not have the old driver to check?
                                                  What kinda speaker are you changing them for? Sub bass/kick bass/mid?

                                                  no i dont tw@ mate of mine left em in da cupboard when he moved out of his house real sharp along with 4 of my 15 inch drivers an the wood (cut up an ready to assemble!!) so a bit pissed off about that 1!!they are mid/top flared horns so will have to check dimensions befor buying….why did you ask??….lol…thought you was talkin to me???loosin it i swear!!

                                                  #1152329
                                                  elretardo87
                                                  Participant

                                                    If you are buying new drivers CHECK THE THIELE SMALL PARAMETERS FIRST.

                                                    Compare the paramteres of the old driver with the new one and if they are very similar then it will work in the cab.Buying any old 15″ driver will sound shite, especially as people tend to go for the most powerful driver they can afford.

                                                    Mr AHC if your stuck stick up a picture of the back of the driver and I’ll see if I an help.

                                                    d.r.e.a.m if you tel us what type of cabinets you have I can suggest the ones that will be most appropriate if theat helps. As your wasting money on drivers if you have the wrong ones in as they are not designed for the job so they will sound shit or break, although probably both.

                                                    #1207913
                                                    elretardo87
                                                    Participant

                                                      If you are buying new drivers CHECK THE THIELE SMALL PARAMETERS FIRST.

                                                      Compare the paramteres of the old driver with the new one and if they are very similar then it will work in the cab.Buying any old 15″ driver will sound shite, especially as people tend to go for the most powerful driver they can afford.

                                                      Mr AHC if your stuck stick up a picture of the back of the driver and I’ll see if I an help.

                                                      d.r.e.a.m if you tel us what type of cabinets you have I can suggest the ones that will be most appropriate if theat helps. As your wasting money on drivers if you have the wrong ones in as they are not designed for the job so they will sound shit or break, although probably both.

                                                    Viewing 25 posts - 1 through 25 (of 121 total)
                                                    • You must be logged in to reply to this topic.

                                                    Forums Music Speaker Plans Speakers