Forums Music Sound Engineering Sound System How To…

Viewing 25 posts - 76 through 100 (of 115 total)
  • Author
    Posts
  • #1119168
    Anonymous
      DaftFader wrote:
      if you are running sterio then mby get a sterio one .. but alot of rigs use briged mono on there amps .. if you use bridged mono .. theres no point in having a sterio cross over ..

      We dont bridge as a rule though we stack the speakers when usin a smaller rig.

      got bad feed back probs at the mo so need a x over asap.

      #1139906
      Anonymous
        DaftFader wrote:
        if you are running sterio then mby get a sterio one .. but alot of rigs use briged mono on there amps .. if you use bridged mono .. theres no point in having a sterio cross over ..

        We dont bridge as a rule though we stack the speakers when usin a smaller rig.

        got bad feed back probs at the mo so need a x over asap.

        #1119183
        elretardo87
        Participant
          MrAHC wrote:
          now were arguing weather to buy a mono or sterio x over.

          Most are stereo when used 2 or 3 way (as in Hi/Lo Left and Right or Hi/Mid/Low Left and Right) but if your try and use them 4 way they will only do it in mono so you get Hi/Mid/Bass/Sub but only one channel for each.

          If its just a cheap but effective solution you are after then I’d suggest either the

          Behringer CX3400 (arround £80-100) or the Samson S Class S 3 Way (which can be found for arroudn £130)

          #1139922
          elretardo87
          Participant
            MrAHC wrote:
            now were arguing weather to buy a mono or sterio x over.

            Most are stereo when used 2 or 3 way (as in Hi/Lo Left and Right or Hi/Mid/Low Left and Right) but if your try and use them 4 way they will only do it in mono so you get Hi/Mid/Bass/Sub but only one channel for each.

            If its just a cheap but effective solution you are after then I’d suggest either the

            Behringer CX3400 (arround £80-100) or the Samson S Class S 3 Way (which can be found for arroudn £130)

            #1119169
            Anonymous
              elretardo87 wrote:
              Most are stereo when used 2 or 3 way (as in Hi/Lo Left and Right or Hi/Mid/Low Left and Right) but if your try and use them 4 way they will only do it in mono so you get Hi/Mid/Bass/Sub but only one channel for each.

              If its just a cheap but effective solution you are after then I’d suggest either the

              Behringer CX3400 (arround £80-100) or the Samson S Class S 3 Way (which can be found for arroudn £130)

              a x over would get rid of my feedback problem wont it?

              #1139907
              Anonymous
                elretardo87 wrote:
                Most are stereo when used 2 or 3 way (as in Hi/Lo Left and Right or Hi/Mid/Low Left and Right) but if your try and use them 4 way they will only do it in mono so you get Hi/Mid/Bass/Sub but only one channel for each.

                If its just a cheap but effective solution you are after then I’d suggest either the

                Behringer CX3400 (arround £80-100) or the Samson S Class S 3 Way (which can be found for arroudn £130)

                a x over would get rid of my feedback problem wont it?

                #1119211
                DaftFader
                Participant
                  MrAHC wrote:
                  We dont bridge as a rule though we stack the speakers when usin a smaller rig.

                  got bad feed back probs at the mo so need a x over asap.

                  i know it sounds silly . but you tryed putting hte decks futher away from the speakers … or isolating them ?

                  #1139950
                  DaftFader
                  Participant
                    MrAHC wrote:
                    We dont bridge as a rule though we stack the speakers when usin a smaller rig.

                    got bad feed back probs at the mo so need a x over asap.

                    i know it sounds silly . but you tryed putting hte decks futher away from the speakers … or isolating them ?

                    #1119170
                    Anonymous
                      DaftFader wrote:
                      i know it sounds silly . but you tryed putting hte decks futher away from the speakers … or isolating them ?

                      its not that, its since i upgraded my amps i think. though in this room a 3.5k rig dont leave you much space

                      #1139908
                      Anonymous
                        DaftFader wrote:
                        i know it sounds silly . but you tryed putting hte decks futher away from the speakers … or isolating them ?

                        its not that, its since i upgraded my amps i think. though in this room a 3.5k rig dont leave you much space

                        #1119212
                        DaftFader
                        Participant

                          i get the same problems with a pair of 200 watt speakers i got … small room and on certain frequencys theres is stupid amouts of feed back from the decks …. but if it wasn’t doing it before ..then as you say it might not be that

                          #1139951
                          DaftFader
                          Participant

                            i get the same problems with a pair of 200 watt speakers i got … small room and on certain frequencys theres is stupid amouts of feed back from the decks …. but if it wasn’t doing it before ..then as you say it might not be that

                            #1119184
                            elretardo87
                            Participant
                              MrAHC wrote:
                              a x over would get rid of my feedback problem wont it?

                              Explain what you mean by feedback? (I know what it should mean but I’m just checking)

                              #1139923
                              elretardo87
                              Participant
                                MrAHC wrote:
                                a x over would get rid of my feedback problem wont it?

                                Explain what you mean by feedback? (I know what it should mean but I’m just checking)

                                #1119171
                                Anonymous
                                  elretardo87 wrote:
                                  Explain what you mean by feedback? (I know what it should mean but I’m just checking)

                                  when i put the gain up on eather the 2.4kw amp that runs my w bass bins i get awfull feed back.

                                  just bought a beringer cx3400 btw

                                  #1139909
                                  Anonymous
                                    elretardo87 wrote:
                                    Explain what you mean by feedback? (I know what it should mean but I’m just checking)

                                    when i put the gain up on eather the 2.4kw amp that runs my w bass bins i get awfull feed back.

                                    just bought a beringer cx3400 btw

                                    #1119177
                                    BioTech
                                    Participant
                                      MrAHC wrote:
                                      when i put the gain up on eather the 2.4kw amp that runs my w bass bins i get awfull feed back.

                                      just bought a beringer cx3400 btw

                                      I think he means what is the type of noise that you hear? Is it a buzzing sound, a deep rumble, a static sound, a loud hum? Does it devlop or does it come on instantly?

                                      #1139915
                                      BioTech
                                      Participant
                                        MrAHC wrote:
                                        when i put the gain up on eather the 2.4kw amp that runs my w bass bins i get awfull feed back.

                                        just bought a beringer cx3400 btw

                                        I think he means what is the type of noise that you hear? Is it a buzzing sound, a deep rumble, a static sound, a loud hum? Does it devlop or does it come on instantly?

                                        #1119172
                                        Anonymous
                                          BioTech wrote:
                                          I think he means what is the type of noise that you hear? Is it a buzzing sound, a deep rumble, a static sound, a loud hum? Does it devlop or does it come on instantly?

                                          higher piched hum louder with the turn of the gain. theres a slight buzz from the tops also

                                          #1139910
                                          Anonymous
                                            BioTech wrote:
                                            I think he means what is the type of noise that you hear? Is it a buzzing sound, a deep rumble, a static sound, a loud hum? Does it devlop or does it come on instantly?

                                            higher piched hum louder with the turn of the gain. theres a slight buzz from the tops also

                                            #1119202
                                            Raj
                                            Participant

                                              Sounds like an earth problem – check all the earthing in all your kit. Since it comes out of both speaker sets I would go for a common piece of kit the two share. The mixer, decks and crossovers if you have any are where I would start checking.

                                              💡 Do you actually earth your genny? That could be your trouble if you dont.

                                              Do you use balanced line? if not you could just have rf interference being picked up by your cables [which is why we use balanced line everywhere we can] and sanitising it could be challenging

                                              If I come up with any more ideas I will post them here

                                              #1139940
                                              Raj
                                              Participant

                                                Sounds like an earth problem – check all the earthing in all your kit. Since it comes out of both speaker sets I would go for a common piece of kit the two share. The mixer, decks and crossovers if you have any are where I would start checking.

                                                💡 Do you actually earth your genny? That could be your trouble if you dont.

                                                Do you use balanced line? if not you could just have rf interference being picked up by your cables [which is why we use balanced line everywhere we can] and sanitising it could be challenging

                                                If I come up with any more ideas I will post them here

                                                #1119213
                                                DaftFader
                                                Participant
                                                  Raj wrote:
                                                  Sounds like an earth problem – check all the earthing in all your kit. Since it comes out of both speaker sets I would go for a common piece of kit the two share. The mixer, decks and crossovers if you have any are where I would start checking.

                                                  💡 Do you actually earth your genny? That could be your trouble if you dont.

                                                  Do you use balanced line? if not you could just have rf interference being picked up by your cables [which is why we use balanced line everywhere we can] and sanitising it could be challenging

                                                  If I come up with any more ideas I will post them here

                                                  some times doggy connections/leads can make a hum as well (by dodgy i mean broken)… try swaping around any leads you can to see if that stops it ..(i had a phono lead that used to hum .. changed it and now its fine)

                                                  #1139952
                                                  DaftFader
                                                  Participant
                                                    Raj wrote:
                                                    Sounds like an earth problem – check all the earthing in all your kit. Since it comes out of both speaker sets I would go for a common piece of kit the two share. The mixer, decks and crossovers if you have any are where I would start checking.

                                                    💡 Do you actually earth your genny? That could be your trouble if you dont.

                                                    Do you use balanced line? if not you could just have rf interference being picked up by your cables [which is why we use balanced line everywhere we can] and sanitising it could be challenging

                                                    If I come up with any more ideas I will post them here

                                                    some times doggy connections/leads can make a hum as well (by dodgy i mean broken)… try swaping around any leads you can to see if that stops it ..(i had a phono lead that used to hum .. changed it and now its fine)

                                                    #1119216
                                                    PIDGE
                                                    Participant

                                                      This is a great idea and will be realy useful. One thing I cant seem to find out is how much a standard rig costs to build. I don’t really know how big a standard rig is so sorry if this is a bit broad, just looking for some idea

                                                    Viewing 25 posts - 76 through 100 (of 115 total)
                                                    • You must be logged in to reply to this topic.

                                                    Forums Music Sound Engineering Sound System How To…