Internet Radio Streaming with Edcast

[Angel]

Edcast Installation Guide

Please be advised that if you are looking to play on Party Vibe Radio as a new show you should upload a mix for us to download and listen to before you go to all this trouble.

The following instructions are a step by step guide to configuring Edcast standalone (NOT Winamp) version.

For more information about internet radio visit our guide to listening to internet radio or our internet radio station directory...

1. Download Edcast:

http://www.oddsock.org/tools/edcast/

You want the STANDALONE version.

2. Install Edcast:

When your installing you will be offered some 'components to install'. The first three boxes are going to be ticked but you must also tick 'LAME encoder dll' as well. This will ensure you can stream in MP3 format that everyone is compatible with.

3. Install the LAME encoder DLL:

Towards the end of installing Edcast a message box will pop up informing you that you must install a file called 'lame_enc.dll' into your Edcast program directory (usually c:\program files\edcastV3). Click NO as you can download the file here :

DLL-files.com - lame_enc.dll

Copy the file into your Edcast program directory (usually c:\program files\ EdcastV3).

4. Load Edcast:

Click the desktop or start menu shortcut for Edcast to load it.

5. Adding the Edcast Encoder:

Click 'Add Encoder' on Edcast. This will add an entry in the white box below, double click on this to configure it.

6. Configuring the Encoder's 'Basic Settings':

Bit rate: 128
SampleRate : 44100 (default)
Channels : 2 (default, stereo)
EncoderType : MP3 Lame
ServerType : Shoutcast
ServerIP : 74.86.126.162
ServerPort : 8002
Reconnect Seconds : 1




YP Settings

public server = Ticked
stream name = Party Vibe - Free Party Radio [LIVE NOW!]
stream description = Playing Pre-Recorded Mixes 24/7 and Live DJs Every Night
stream URL = www.partyvibe.com
stream genre = <what you play!>



8. Configuring the Encoder's 'Advanced Settings':

Please save an archive of your radio shows as an mp3 or provide us with an mp3 version of it for our archives so that people can download your show to listen to on tap.

9. Choose your Source ('Live Recording'):

On the Edcast main screen there is a 'Live Recording' section on the right hand side. Click on the X to enable it. Now choose what you have selected as you input, usually 'Line In'. Now click on the 'Peak Meter' to tweak your levels.

10. Metadata:

For people to see who's playing you need to edit the metadata.

Open Edcast






11. Connect:

Now provided you have followed these instructions and everything is setup fine (and you have been granted the password) you should be able to click 'Connect'. The 'Transfer Rate' option should say connected then change to your bitrate and mount point.

Now you're LIVE!

To get the password for the stream please contact [login and Private Message] Dr Bunsen, Bio-tech,Raj or Angel

And again...

Please be advised that if you are looking to play on Party Vibe Radio as a new show you should upload a mix for us to download and listen to before you go to all this trouble...

12. Uploading Your Set after the Show:

You can upload your set after your done using www.sendspace.com addressed to submit@partyvibe.com where it will be added to the rest of our music downloads...

To all radio streaming crews:

Always make sure you have someone with you on another internet connection to test the quality of the stream!

And Feel free to ask if you have any problems...

Tuning in to the internet radio streams on Party Vibe:

Stream 1 (pre-recorded): http://www.partyvibe.com/radio-192kbs.php
Stream 2 (live shows & pre-recorded): http://www.partyvibe.com/radio-128kbs.php

[DontBeliveTheHype!]

woo new stream lined instructions

[Dr Bunsen]

I've updated this thread with a few minor tweaks...

[Angel]

Thank you Dr B